Accredited Managing Mobile Plant certificate
Managing Mobile Plant Training
Managing mobile plant training is a one-day course for site managers, supervisors and SHEQ leads who control plant rather than drive it. It covers traffic management, segregation and exclusion zones, operator competence checks, permit-to-work, lift planning and incident response, working to CDM 2015, PUWER 1998 and HSG144, and is delivered on your own site.
Site managers, supervisors and SHEQ leads.
Training is delivered on your site across Aberdeen, Aberdeenshire and North-East Scotland; contact us to discuss dates and a quote.
Learning built around site-realistic plant mix and traffic management plans
This course is for site managers, supervisors and sheq leads. The practical work centres on site-realistic plant mix and traffic management plans, with the assessment matched to the machine, task and operating conditions the candidate will face.
Skills covered
- Traffic management, segregation and exclusion zones
- Operator competence checks and supervision
- Permit-to-work, lift planning and incident response
Practical situations covered
The exercises reflect the tasks and constraints attached to managing mobile plant work.
Exercise 1
Designing a one-way site traffic plan with separate gates for plant and pedestrians
Exercise 2
Verifying operator competence on a sub-contract crew you've never used
Exercise 3
Plant-on-pedestrian near-miss: investigation, lessons, and traffic-plan rework
Errors the course addresses
These course-specific errors are dealt with through instruction, observation and practical assessment.
- Traffic plan drawn at tender stage and never updated as the site phases changed
- Competence assumed from a card — never physically observed on your machine
- No incident-investigation template, so the same near-miss happens at every project
Published safety context
~25%
of UK construction fatalities involve mobile plant striking a pedestrian.
Source: HSE / HSG144 background data.
What supervisors leave this course able to do
The day is built round decisions a supervisor makes every week: where the haul route goes when a new excavation opens, how pedestrians reach the welfare cabin without crossing a working zone, when a banksman is genuinely needed and when the layout should change instead, and how to check an operator's card and competence before the first bucket is filled.
Attendees work on the plan for their own site, so they leave with changes they can make that week rather than notes from a generic case study. For a manager deciding between this and a broader safety management course, the IOSH for plant managers guide sets out how the two compare.
Training for plant managers and supervisors
Plant managers are judged on what happens when they are not watching: whether the traffic plan still fits the site, whether a new sub-contract operator has been checked, and whether a near-miss leads to a change. Managing mobile plant training is built around those decisions rather than around driving a machine, so it suits plant managers, site managers, supervisors and SHEQ leads.
The course works through traffic management, segregation and exclusion zones, operator competence checks, permit-to-work, lift planning and incident response, and ties each topic back to CDM 2015, PUWER 1998 and the HSE's HSG144 guidance on vehicles at work.
IOSH, HSE guidance and plant manager training
People searching for plant manager IOSH training or plant manager HSE training are usually after one of two things: a general health and safety management qualification, or practical training in controlling plant. IOSH courses cover the first. Managing mobile plant training covers the second, using HSE guidance as its reference. Many plant managers hold both, and our guide on IOSH or managing mobile plant training explains how they fit together.
Because the course runs on your own site, the traffic plan, gate arrangements and plant mix used in exercises are your own, so delegates leave with changes they can make the following day.
Who managing mobile plant training is for
Managing mobile plant training is for the people who control plant rather than drive it: supervisors, plant managers, site managers and SHEQ leads who plan machine movements, set up segregation and exclusion zones and arrange banksman cover. Operators need their own machine training; this course is aimed at those managing them.
It suits anyone who signs off a traffic plan, checks that an operator holds the right card for the machine, or decides what changes after a near-miss. The course is delivered on your own site, so the examples come from your own routes, machines and pedestrian areas.
Weighing this course against IOSH? Read IOSH or managing mobile plant training for plant managers.
Related answers
Managing Mobile Plant Training questions
- Is managing mobile plant training for operators?
- No. It is for site managers, supervisors and SHEQ leads who plan and supervise plant work. Operators need their own machine training.
- Is there a novice mobile plant course?
- Yes, the mobile plant novice training guide explains the route for new operators, while this course is aimed at those managing them.
- What training does a plant manager need?
- Plant managers need to plan and supervise plant work safely. Managing mobile plant training covers traffic management, competence checks, permit-to-work, lift planning and incident response for that role.
- Is managing mobile plant training an IOSH course?
- No. It is a practical one-day course on controlling mobile plant. IOSH courses cover general safety management; many managers take both.
- Does the course follow HSE guidance?
- Yes. It works to CDM 2015, PUWER 1998 and the HSE's HSG144 guidance on vehicles at work.
- What is managing mobile plant training?
- Managing mobile plant training is a one-day course for site managers, supervisors and SHEQ leads who plan and supervise mobile plant work. It covers traffic management, segregation, operator competence checks, permit-to-work, lift planning and incident response.
- Can managing mobile plant training be delivered on our own site?
- Yes. The course is delivered on your own site across Aberdeen, Aberdeenshire and North-East Scotland, so the training uses your own layout, machines and traffic routes.
- What does managing mobile plant training cover?
- Traffic management, segregation and exclusion zones; Operator competence checks and supervision; Permit-to-work, lift planning and incident response.
- Which equipment is used?
- Site-realistic plant mix and traffic management plans. Training and assessment use the relevant equipment available on your site.
- Who is the course for?
- Site managers, supervisors and SHEQ leads. Prerequisites: Site management or supervisory role; CSCS-equivalent helpful.
- What certification is issued?
- Accredited Managing Mobile Plant certificate. The course covers CDM 2015, PUWER 1998 and HSG144.
- How long does training take?
- 1 day.